If you walk around in a city. From the LRT to the hotel to other public places. You’ll mostly encounter different types of turnstile gates, that control people’s movement.
This barrier and turnstile are used in order to control the flow of individuals. Making the security much better.
Different types of turnstiles bring different kinds of benefits. Some may be cost-effective some may provide optimum security.
Today we’re going through 5 different types of turnstile gates along with their benefits and the place they are usually used at.
Waist-high Turnstiles Gate
This is the most usual turnstile gate you’ll see. Waist-high turnstiles are stationary devices with three spinning arms and a center post that are about 40 inches high which is used to restrict entrance.
Tripod turnstiles are models with three arms that have acceptable height for most individuals to pass through. Turnstiles that are waist-high can also include flaps or single arms that open or lower to let people pass.
This style of turnstile gate can be installed in numerous lanes for bigger, busy locations or utilized as a standalone access point in small places. For the majority of applications, waist-high security turnstiles are an affordable solution that may be installed indoors or outdoors.
Since the cost of these turnstile gates is reasonable, they are a preferred option for a range of establishments. They can include readers or other devices to authenticate tickets or credentials and can be used to control both entry and exit.
Although these models are practical, easy to use, and dependable when operating normally, they can create bottlenecks and delays during busy periods or when huge crowds are anticipated.
A turnstile that is waist high makes it simpler for unauthorized people to enter since it allows them to avoid paying by climbing or leaping over the barriers.
Full-height Turnstiles
Full-height turnstiles are substantially larger barriers that function similarly to spinning doors. These models can either allow entry and exit in either direction or both. Tandem types from several turnstile providers enable side-by-side entry and exit.
Full height turnstiles are typically between seven and eight feet tall. The greater height makes it impossible for individuals to scale turnstile gates.
Full-height turnstile gates can be built from solid materials for optimum security or with an open appearance using vertical and horizontal bars. They are typically employed in locations with higher levels of security, including government buildings.
Full-height models have a sturdy structure that provides security and longevity, but they have a big, bulky appearance and can get in the way when there is a lot of traffic.
Optical Turnstiles
Optical turnstiles monitor traffic by detecting people who cross a beam of light using infrared sensors. Users can provide credentials to a turnstile gate with an attached card reader where entry is restricted.
The individual can pass through the turnstile door access control if the credentials are legitimate. Any attempt to enter without proper authorization will result in a visible or audible alarm to notify security.
Optical turnstiles enable either unfettered entry or limited admission with appropriate tickets and credentials. In open access applications, the barrier merely counts visitors as they pass through to make sure the space isn’t overflowing and saves their numbers for study.
This information might provide light on several business sectors. For instance, to compare the popularity of several exhibitions, a museum would look at the total number of visitors.
Handicap Turnstiles
A handicap turnstile is often created for physically challenged individuals to make it easier for them to move about. The lane width of a handicap turnstile, which controls wheelchair access for those with disabilities, should be at least 900mm. So that wheelchairs and the disabled can easily move through.
The traditional flap barrier turnstile and tripod turnstile are not the same as the handicap turnstile. Physical barriers like wing plates and blocking rods are ineffective at restricting access. The handicap turnstile just has an inductive recognition function and no motion principle.
Handicap turnstiles come in a variety of designs and can be personalized to meet your specific requirements. Swing turnstile gates and speed gates can be customized for the disabled and the physically challenged.
Access for people with disabilities is possible with all swing turnstile and speed gate versions. Some kinds of sliding gate turnstiles and double retractable flap barriers can also accommodate passageways with a 900mm width.
Portable Turnstile Gates
Although they are not permanently affixed to the ground and can be moved quickly and easily to locations where they are required for temporary access control, portable turnstile gates resemble waist-high turnstiles in appearance. These turnstile gate versions have sturdy base plates attached to the centre posts, and for simple movement, wheels are positioned beneath the base plates.
Security teams can use portable access control turnstiles to temporarily manage crowds in areas or places without a long-term access control solution, especially if traffic volumes vary. In buildings or locations where permanent barriers are prohibited, the devices can also be employed as temporary access control barriers for access control.
Are you searching for security gate system supplier for your home or business? VSH technology is a trusted source of first-rate security gate system suppliers for your home and business in Malaysia. With over five years in this industry, we aim to equip you with the best security system you can get.
